WM3000 Sawmill

	Customer Tools Request a Catalog Sawmill Comparison Wood-Mizer Financing Locate a Dealer

The WM3000 may be the first step in making your business high production, but there's nothing amature about it. Increase productivity, yield and profit with this reliable thin-kerf sawmill. Get more grade and total yield from each log. Reduce costs for setup, operation and maintenance. Versatility allows primary breakdown or stand alone operation.

Specifications

Overall Dimensions
Mill Bed Length	27’11” (8.51m)
Length with Operators Station	35’7” (10.85m)
Height (ground to mast top)	8’ 6”- 9’ 3” (2.59 - 2.82m) Adj
Height (with head at maximum)	9’ 6”- 10’ 3” (2.89 - 3.12m) Adj
Bed Height (ground to bed)	30”- 38” (76 - 97cm) Adj
Width	9’4” (2.85m)

Weights
Mill	5,280lbs (2,400kg)
Control Station	1,040lbs (473kg)
Control Station w/ Cab & Air	2,120lbs (964kg)
Complete Mill w/ Cab & Air	7,400lbs (3,364kg)

Cutting Capacities
Maximum Length	21’ 6” (6.55m)
Maximum Length using board removal	20’ 3” (6.17m)
Largest Log (slab and saw)	36” (.91m)
Maximum cant size	25” x 25” (64 x 64cm)
Blade to Throat Clearance	13" (33cm)
Maximum cut depth @ 24" wide	5" (13cm)
Maximum cut depth @ 22” wide	13" (33cm)
Minimum material dogging capacity	2” (5cm)
Maximum log weight	4,400lbs (2,000kg)

Power
Blade Motor	30HP, 380/460V, 50/60Hz, 1,725RPM
Blade Braking	2.6 seconds
Up/Down Motor	2HP 380/460V, 50/60Hz
Vertical Head Speed	3.4in/sec (86mm/sec)
Power Feed Motor	2HP 380/460V, 50/60Hz
Carriage Speed (Forward)	170ft/min (51m/min)
Carriage Speed (Reverse)	300ft/min (91m/min)

Air Requirements
Air Requirements	Shop Air Supply 110psi @ 16.5cfm

Electrical Requirements
Electrical Service	460V 60Hz 3Ph 100Amp

Hydraulic System
Motor	7 1/2 HP
Pump	6 GPM

Blade Wheels
Options	Belted Cast Steel, Solid Cast Steel-optional
Size	25” (63.5cm) Dia.
Axles/Bearings	Fixed shafts, Timken Bearings

Dust Collection
6” (15mm) Dust Collection Port

Options

A cab with a lockable door is an option to enclose the operator’s station, providing added levels of safety, sound isolation, and protection from the environment. Studies show that increased climate control results in increased operator performance.

Log loading arms can be added to the WM3000 to lift logs from the floor or from a dead log deck, or onto the machine with a live deck but no tipple.

A heating/air conditioning unit can be added to the cab for further climate control. The heater is rated at 5600 BTU’s and the air conditioner is rated at 7000 BTU’s

Solid steel wheels are available as an option on the WM3000.

Extend blade life with a debarker unit which cleans the log before each cut, preventing blades from running into anything that can damage them.

Products