Wood-Mizer Sawmill Service Plans
Enjoy the best service available
Wood-Mizer offers reasonable rates and flexible service plans to owners of new and used sawmills. Our network of locations makes service calls even more convenient for the customer. (All terms and offers are subject to change without notice.)
Question: What is the charge for sawmill field service calls?
Answer: The price for field service depends on the type of service needed.
Emergency Service - Emergency service is when you require a service technician to come to you as your mill is down and you're unable to bring the mill to us. Charges for an emergency service are 2.25 per mile each way with a labour charge of $65.00 per hour on site.
Maintenance Service - You can select one of our service plans or service by the hour. Service by the hour is $65.00 per hour on site. The service plans are Silver $255.00, Gold $395.00 and Platinum $500.00. These service plans cover normal maintenance levels on your mill based on the number of hours that your mill has on it. Silver is 500 or less hours, Gold is 500 to 2000 hours and Platinum is 2000 or more hours. This is the most cost effective way, for both you and Wood-Mizer, to service your mill.
Used Sawmill Service
Question: What are the service options for used mills?
Answer: Wood-Mizer recognizes that many mill customers are purchasing our sawmills used. We welcome all new customers, and would like to ensure they are all thoroughly trained. Wood-Mizer offers free training to customers who purchase a Silver, Gold, or Platinum mill service plan.
Mills with 500 hours or less must have the Silver Plan. Mills with between 500-2,000 hours must have the Gold Plan. Mills with greater than 2,000 hours must use the Platinum Plan. The free training is not offered at Field Days.
| Silver - $255 |
Gold - $395 |
Platinum - $500 |
SERVICE PLAN
500 hours or less |
SERVICE PLAN
500 to 2000 hours |
SERVICE PLAN
2000 hours |
INSPECT/CHECK
- Blade Guide Rollers
- Drive Belt Tension
- Brake Adjustment
- Power Feed Belt and Check Tension
- Power Feed Chain Tension
- Up/Down Belt and Check Tension
- Up/Down Chain Tension
- Alternator Belt Tension
LUBE:
- Top Off Cylindrical Bearing with Fluid*
- Chrome Tension Rods
- Power Feed Chain
- Track Oiler
- Up/Down Chain
- Mast
- Blade Guide Arm
- Blade Guide Arm Chain
- Blade Guide Rollers
ROUTINE ALIGNMENT:
- Blade Tracking
- Sawhead Tilt
- Blade Guide Arm
- Blade Guide Vertical Tilt
- Blade Guide Horizontal Tilt
- Blade Guide Flange Spacing
- Align Side Supports
- Blade Height Scale
- Test Cut
|
INSPECT/CHECK:
- Blade Guide Rollers
- Drive Belt Tension
- Brake Adjustment
- Power Feed Belt
and Check Tension
- Power Feed Chain Tension
- Up/Down Belt and Check Tension
- Up/Down Chain Tension
- Alternator Belt Tension
- Drum Switch and Lubricate
- Cam Follower Bearings
- Hydraulic Fluid Level
- Engine Air Filter
- Engine Fuel Filter
- Hydraulic Hot Contact
LUBE:
- Top Off Cylindrical Bearing with Fluid*
- Chrome Tension Rods
- Power Feed Chain
- Track Oiler
- Up/Down Chain
- Mast
- Blade Guide Arm
- Blade Guide Arm Chain
- Blade Guide Rollers
FACTORY ALIGNMENT:
- Sawhead Slide Pad
- Blade Tracking
- Sawhead Tilt
- Bed Rails
- Blade Guide Deflection
- Blade Guide Arm
- Blade Guide Vertical Tilt
- Blade Guide Horizontal Tilt
- Blade Guide Flange spacing
- Align Side Supports
- Clamp Stop/Stop Bolt
- Blade Height Scale
- Test Cut
|
INSPECT/CHECK:
- Blade Guide Rollers
- Drive Belt Tension
- Brake Adjustment
- Power Feed Belt
and Check Tension
- Power Feed Chain Tension
- Up/Down Belt and Check Tension
- Up/Down Chain Tension
- Alternator Belt Tension
- Drum Switch and Lubricate
- Cam Follower Bearings
- Hydraulic Fluid Level
- Engine Air Filter
- Engine Fuel Filter
- Hydraulic Tensioner/
Add Fluid If Needed
- Motor Mount Bushings
- Gearbox Oil
- Exchange Gallon of Hydraulic
Oil from Each Reservoir
- Change Hydraulic Filter
LUBE:
- Top Off Cylindrical Bearing with Fluid*
- Chrome Tension Rods
- Power Feed Chain
- Track Oiler
- Up/Down Chain
- Mast
- Blade Guide Arm
- Blade Guide Arm Chain
- Blade Guide Rollers
FACTORY ALIGNMENT:
- Sawhead Slide Pad
- Blade Tracking
- Sawhead Tilt
- Bed Rails
- Blade Guide Deflection
- Blade Guide Arm
- Blade Guide Vertical Tilt
- Blade Guide Horizontal Tilt
- Blade Guide Flange spacing
- Align Side Supports
- Clamp Stop/Stop Bolt
- Blade Height Scale
- Test Cut
|
| * Drain and replace on mills with sight gauge if over 400 hours. |
For details on sawmill service plans and pricing, contact a Customer Service representative at 1.877.866.0667. |
